2019年发表的论文

2019-07-01 18:56 1793
序号论文名称作者期刊会议发表时间收录情况影响因子
1Multi-Objective Optimization of Contactor's Characteristics Based on RBF Neural Networks and Hybrid MethodYang Wenying,Guo Jiuwei ,Liu Yang,Zhai GuofuIEEE TRANSACTIONS ON MAGNETICS 2019.07SCI1.651
2Fretting wear and reliability assessment of gold-plated electrical connectorsL. Xu, S. Ling, Y. Lin, D. Li, S. Wu, G. ZhaiMicroelectronics reliability2019SCI1.5
3A non-linear permanent magnet working point migration model and its application to simulation of a polarized magnetic systemLi, Bo, Liang, Huimin, You, Jiaxin, Xiong, Fangyuan and Sykulski, JanJournal of Magnetics2019.09SCI0.837
4Robust Design Optimization of Electromagnetic Actuators for Renewable Energy Systems Considering the Manufacturing Cost邓杰,刘晓涵,翟国富energies期刊2019.11SCI2.707
5Effect of electrical load on contact welding failure of silver tin oxide material used in electromechanical relays任万滨IEEE Access2019.9SCI4.098
6Electrical contact resistance (ECR) of connector response to mechanical vibration environment任万滨IEEE Transactions on Components, Packaging and Manufacturing Technology2019.8SCI1.86
7Understanding of the static contact behaviors of rod and spring for Micro-electromechanical-relay任万滨IEEE Transactions on Components, Packaging and Manufacturing Technology2019.5SCI1.86
8Modeling and Experimental Verification of Contact Sliding Behavior for Flexible Spring Components Within Electromechanical Relays任万滨IEEE Transactions on Components, Packaging and Manufacturing Technology2019.4SCI1.86
9Quality and Reliability Optimization Design for Electromagnetic Devices Based on Various Uncertainties and Time-Dependent Sensitivity AnalysisYe Xuerong, Chen Hao, Wu Yang, Liang Huimin, Zhai GuofuMicroelectronics Reliability2019.09SCI1.371
10A Novel Method for Comprehensive Quality and Reliability Optimization of High-Power DC Actuators for Renewable Energy SystemsDeng Jie,Chen Hao, Ye Xuerong, Zhai GuofuEnergies2019.11SCI2.707
11Algorithm Used to Detect Weak Signals Covered by Noise in PINDGuotao Wang, Liang Xiaowen, Li Chao, Ding Qun.International Journal of Aerospace Engineering2019.12SCI
12Multi-Time Scale Thermal Simulation-Assisted Lifetime Prediction of Power MOSFET in LED DriverHao Niu, Shujuan Wang, Rao Fu, Xuerong Ye, Guofu ZhaiRAMS 20192019.1EI
13Fault Diagnosis of 12-phase Synchronous Rectified Power System Based on Fuzzy Pattern RecognitionLiqin Wu, Lu Wang, Jingnan Zhang, Hao Niu, Xuerong YeRAMS 20192019.1EI
14A Test Method for the Failure Mechanisms Consistency of Accelerated Degradation Test Based on Wiener ProcessBokai Zheng, Shuang Si, Yigang Lin, Cen Chen, Xuerong Ye, Guofu Zhai.RAMS 20192019.1EI
15Multi-physics simulation method of contact contact resistance based on fractal theory李茹瑶,杨文英,邱子澜,梁慧敏ICREPEC2019 2019.06EI
16热场影响下新能源用接触器弹跳特性研究杨文英,刘兰香,翟国富电工技术学报2019.11EI
17Study on Closed Collision Bounce Characteristics and Contact Reliability of Contactors under Capacitive LoadWenying Yang, Lanxiang Liu, Guofu ZhaiICREPEC2019 2019.06EI
18An Active Limit Baffle for the Phenomenon of Arc Instability and Re-ignitionXue Zhou*, Yuxin Zhou, Huimin Liang, Guofu ZhaiEI会议2019.9EI
19接触器触点超程分析及其退化状态的诊断研究付饶,梁慧敏,叶雪荣,由佳欣,韦震电工技术学报2019.03EI
20Research on Composite Fretting Behaviour of Au-Plated Copper Wire Spring Contacts Used in Electrical ConnectorsSanqiang Ling, Le Xu, Donghui Li, Sai Wu, Guofu ZhaiThe 65th IEEE Holm Conference on Electrical Contacts2019EI
21基于分断动能的小型密封电磁继电器过负载能力提升方法李博;由佳欣;熊方圆;谭旭; 梁慧敏电工技术学报2019.05EI
22Break kinetic energy based overload dynamic model for a small hermetically sealed relayBo Li, Jiaxin You, Sichen Zheng, Yonggang Ruan, Shaojun Wang,Huimin LiangIEEE Conference on Electrical Contacts 20192019.09EI
23铁路继电器触点回跳性能与稳健性优化设计邓杰、涂瑞、翟国富ICREPEC2019 2019.11.5EI
24Research on Limit Life Test and Analysis System of Electromagnetic Relay Based on Combined Load邓杰,赖家明,翟国富ICREPEC2019 2019.06EI
25Long-life Reliability Optimization Design of High-power DC Electromagnetic Relay Considering Thermal Degradation邓杰,徐洪亮,翟国富ICREPEC2019 2019.06EI
26Investigation of the contact welding failure phenomena in the electrical endurance experiments任万滨ICREPEC2019 2019.11EI
27Preliminary experimental study on the insertion and withdrawal characteristics of blade and receptacle pair任万滨ICREPEC2019 2019.9EI
28Failure Analysis and Optimization of Secondary Power Supply in Servo System Based onSimulationLu Wang, Xue-Rong Ye ,Guo-Fu Zhai, Cen Chen, Han WangQR2MSE 20192019.8EI
29Dynamic Balance Consistency Analysis of Permanent Magnet Synchronous Motor Rotor Based on Centrifugal ForceLiqin Wu,Qisen Sun, Yan Zhu, Xuerong YeICEMS 20192019.8EI
30Falut Diagnosis of 12-phase Synchronous Rectifierd Power SystemLiqin Wu, Lu Wang ,Jingnan Zhang, Hao Niu, Xuerong YeQR2MSE20192019.8EI
31Quality Consistency Detection Method of Permanent Magnet Synchronous Motor Based on No-load CurrentXuerong Ye, Liqin Wu, Qisen Sun, Yanmuzi YangICREP;EC 20192019.11EI
32Reliability Evaluation Method for Robot Servo System Basad on Accelerated Degradation TestHan Wang, Zeyu Zhang, Jiang Long, Lu wang, Xuerong YeICEMS20192019.8EI
33A Discriminant method of Accelerated Degradation Mechanism Consistency Based on Wiener Process Shuang Si, Bokai Zheng, Hongyu Zhang, Zhu Yan, Xuerong Ye*, Shujuan Wang  ICREPEC20192019.8EI
34Optimal Design of Accelerated Degradation Failure Mechanism Consistency Discriminant Test Based on D-Optimality Shuang Si, Guo Fu Zhai, Bo Kai Zheng, Xue Rong Ye, Shu Juan WangQR2MSE2019 2019.8EI
35Degradation Modeling and Reliability Evaluation of Key Assembly Parame-ters of Electromagnetic RelaysHao Chen, Yang Wu, Yanmuzi Yang, Xuerong Ye*, Guofu ZhaiICREPEC 20192019.11EI
36Analysis of Degradation Sensitive Characteristics of Switch Power Supply Based on Electro Thermal Coupling SimulationYifan Hu, Rui Feng, Xuerong Ye*, Sirui Liu, Guofu ZhaiICREPEC2019 2019.11EI
37Multi-Time Scale Thermal Simulation-Assisted Lifetime Prediction of Power MOSFET in LED DriverHao Niu, Shujuan Wang, Xuerong Ye, Guofu ZhaiQR2MSE20192019.8EI
38Optimization of Heat Dissipation Design for High-power SiC SSPC Based on Icepak Thermal SimulationHongyu Zhang, Yaokang Lai, Shuang Si, Yan Zhu, KaiXin Zhang, ShuJuan WanICREPEC20192019.11EI
39Research on Material Identification Technology of Sealed Relay Remainder Material Based on Decision TreeYAN Huizhen,CAO Xiaohang,WANG Zixin,WANG GuotaoICREPEC20192019EI
40Multi Channels Data Fusion Algorithm on Quantum Genetic Algorithm for Sealed RelaysQian Xin; Wang Shujuan; Li Chao; Wang GuotaoICSP20192019.7EI
41A New System for Defects Inspection of Boiler Water Wall Tubes Using a Combination of EMAT ,EC and MFL.Shu-juan Wang, Pu Zhao, et al2019 Far East Forum on Nondestructive Testing2019(录用)EI
42Research of fast sheet thickness measurement with EMATDeng Chaoran, Liang Bao, Zhai GuofuThe 14th International Conference on Electronic Measurement & Instruments2019(录用)EI
43Research of High Accuracy Detection on Plates with Electromagnetic Ultrasonic Lamb WaveDeng Chaoran, Li Yongqian, Zhai Guofu, et al2019 4th International Conference on Measurment, Information amd Control2019(录用)EI
44A New System for Defects Inspection of Boiler Water Wall Tubes Using a Combination of EMAT ,EC and MFL.Shu-juan Wang, Pu Zhao, et al2019 Far East Forum on Nondestructive Testing2019(录用)EI
45Research of fast sheet thickness measurement with EMATDeng Chaoran, Liang Bao, Zhai GuofuThe 14th International Conference on Electronic Measurement & Instruments2019(录用)EI
46Research of High Accuracy Detection on Plates with Electromagnetic Ultrasonic Lamb WaveDeng Chaoran, Li Yongqian, Zhai Guofu, et al2019 4th International Conference on Measurment, Information amd Control2019(录用)EI
47基于性能渐变仿真的继电器结构退化故障模拟与验证付饶,叶雪荣,梁慧敏,丁新,翟国富电器与能效管理技术2019.06核心
48常开型继电器触点回弹抑制仿真与试验研究周学,周雨馨,郭振国,梁慧敏,翟国富电器与能效管理技术2019.5核心
49基于原位拉伸台的焊接结构件疲劳试验研究任万滨电工材料2019.1核心
50一种智能式电磁继电器综合特性参数测试仪的设计任万滨电器与能效管理技术2019.9核心
51一种用于材料力学性能测试的新型原位拉伸系统任万滨航天器环境工程2019.4核心
52电连接器接触件插拔模拟试验系统的设计任万滨电工材料2019.2核心
53基于有限元模型的SiC固态功率控制器单裸片键合引线可靠性优化技术方法张宏宇,赖耀康,司爽,王淑娟,翟国富电器与能效2019.9核心
54加速退化机理一致性判别试验测试系统设计与实现司爽,叶雪荣*,王淑娟,郑博恺,张宏宇电器与能效2019.7核心
55基于PIND多余物检测设备的脉冲提取方法设计郜雷阵;燕会臻;王国涛;王强电器与能效管理技术2019核心
56参数优化决策树算法的密封继电器多余物信号识别技术梁晓雯,蒋爱平,王国涛电子测量与仪器学报2019.12核心
57多余物自动检测系统声音调理电路的稳健设计薛永越,王国涛,李响,白向凯电器与能效管理技术2019.12核心
58Numerical investigation on the mechanical, electrical and thermal characteristics of a heavy duty by-pass switch任万滨2019年第一届电力装备绝缘与放电计算学国际研讨会2019.7

59An Improved Magnetic Equivalent Circuit Method for Dynamic Characteristics Calculation of Relay Considering TemperatureYang, Wenying; Guo, Jiuwei; Liu, Yang; Zhai, Guofucompumag会议2019.07

60Multi-objective optimization of contactors based on the improved nondominated sorting genetic algorithm IIIYang, Wenying; Guo, Jiuwei; Liu, Yang; Zhai, Guofucompumag会议2019.07

61An Improved Domain Decomposition with Relaxation Method Used for Calculating Dynamic Characteristic of Electromagnetic DevicesWenying Yang, Zilan Qiu, Fei Peng and Guofu Zhaicompumag会议2019.07

62A New Approach for Electromagnetic Devices Robust Design Consider the Working Point Shift of Permanent MagnetsYe Xuerong, Chen Hao, Wu Yang, Zhai GuofuCompumag20192019